Sureseat Flare Lapping Tool – P37

Description

The Surseat flare lapping tool allows you to lap-in flared tubing to eliminate leaks in fuel and brake line joints. This innovative new tool removes irregularities in the flare and hones it to a perfect angle to enable the tube to seat with the fitting. The Surseat will not only perfect your newly-flared stainless steel, aluminum or copper lines, it can also repair the seal with the fitting of an existing brake or fuel line. It is based on the tried and true practice of lapping engine valves. A diamond dust coated lapping head with a precision 37° or 45° angle literally polishes the flare smooth to perfection. The Surseat is a valuable asset for car builders, automotive repair facilities, and hobbyists.

Surseat Flare Lapping Tool Details

Surseat P-37

• The Surseat P-37 is used for 3/16" & 1/4" stainless steel brake lines with a 37° flare.
• Includes collets to clamp the tube.
• The collet and tube are secured into the P-37 with a lock spring.

Using the Surseat P-45 & P-37

1. For the P-45, screw the fitting into the collet.

 

2. For the P-37, clamp the collet around the tube.

 

3. Install the collet by sliding the locking spring into the closed position.

 

4. Spray some light lubricant to the lapping head before use.

 

5. Rotate lapping head back and forth until a clean seat is formed.

 

Have a question regarding this item? Please use our Contact Us form or call (707) 938-5664 for Customer Service.